High energy consumption has been the major problem of hotels and resorts. But energy management in a beach resort is more challenging as guests take a bath at an average of three times per day per guest.
During the peak of bookings in beach resorts during the summer, not only is hot water for bathing demanded by guests. But also pro1per air conditioning because, obviously, the temperature during summer especially near coastal areas is hot.
Since the main purpose of going to the beach is for leisure, night events in beach resorts also happen regularly. This is where the use of energy efficient lighting in bars and other common areas becomes advantageous.
In this article, we give you various small, helpful tips that will help you reduce energy consumption in your beach resort.
- Avoid overheating hot water. An ideal temperature is 60°C. This provides a more comfortable water temperature and is hot enough to destroy any bacteria. Overheating will have a huge impact on heating costs.
- Avoid unnecessary temperatures when cooling. This utilizes more energy.
- Make sure that the heating system is well controlled. Use thermostatic radiator valves and timer switches. Also make sure that thermostats are protected from draughts, sunlight, fireplaces, and radiators.
- Make sure that pipeworks leading to common areas and bedrooms and heating equipment are well insulated. Maintain them well to reduce heat loss.
- Put up window films. These will help lower cooling and heating loads and minimize glare in rooms.
- Add overhangs of plant trees for shading. These help minimize energy usage for cooling and heating.
- To control the sunshine passing through the windows, use blinds and shades to prevent heat.
- Regularly maintain heating equipment and boilers. Equipment in bad situation utilizes more electricity. This will help you save on your yearly heating costs for up to 10%.
- Avoid turning on air conditioning equipment for cooking. Unless the temperature falls above 23°C.
- Develop a building energy management system (BEMS). These monitor and control air conditioning, ventilation, and heating. This reduces your energy costs by more than 10%.
- Calibrate thermostats. This makes sure that the readings of the thermostat ambient temperature are correct.
- Close windows and exterior doors when you run your heating, ventilation, and air conditioning (HVAC) equipment are running. This may sound simple, but it can help you prevent the loss of cooled or heated air.
- Clean or change your HVAC filters regularly every month, especially during the peak seasons of cooking and heating. Dirty filters consume more energy and may result in poorer quality of indoor air.
- Ensure that areas faced by the vents are free from any paper and furniture. The energy required in distributing air when there are obstructions in front of the vents can reach up to 25%.
- Clean the condenser and evaporator coils on chillers, heat pumps, and air conditioners. Dirty coils impede heat transfer, thus, consuming more energy.
- Install daylight and occupancy sensors in turning lights on and off only in required times.
- Utilize lighting that consumes low energy. Some of the recent types of bulbs last longer and generate less heat. This puts less pressure on the required cooling from the air conditioning systems.
- Light fixtures (e.g. reflectors) must be cleaned and properly maintained as they might affect bulb light intensities.
- Use LED and compact fluorescent lights in hallways, lobbies, and guest rooms.
- Switch off lights when they are not used especially if daylight is adequate. This can cut off your energy usage by 10% to 40%.
- Take advantage of daylighting or other natural light sources to minimize lighting in the daytime.
- Only utilize task lighting is feasible areas.
- Implement a systematic maintenance program for lighting.
- Eliminate unnecessary lamps in over-lit areas.
- Install occupancy sensors or master switches in your guest rooms to control blinds, electronics, temperature settings, and lights.
- Exclusively take advantage of daylight in your bar, restaurant, and lobby as much as possible.
- Use systems for heat recovery in heating up pools.
- Install pool covers. These may help in reducing heat loss via convection.
- Utilize correct procedures for backwashing in cleaning up filters. This can help you save on heating costs by up to 10%. This includes proper usage of pool pumps for draining by reducing pressure restrictions. Directional valves, check valves, purifiers, chlorinators or pool heaters are some of the devices you can use to restrict the water pressure. You can check the XHVAL check valve.
- Improve your practices on operations and maintenance by inspecting and maintaining your equipment regularly to make sure that they are functioning efficiently.
- Optimize the sequencing, start-up and power-down times of appliances and equipment.
- Schedule monthly maintenance activities on equipment used for heating and cooling to guarantee the efficiency of operation for the whole year.
- Inspect all piping insulations, equipment and ducting for damages such as compression, stains, and tears visually.
- Include thermostat calibration, damper adjustments, filter changes and cleaning of the refrigerator coil in your maintenance plans. Check and make sure that all of your building’s energy equipment is working properly.
- Track monthly energy usage using a tracking system. When a change in equipment usage indicates a problem, repair or replace the equipment.
- If an energy auditing service is available in your local energy provider, make a schedule. Or you can also hire an energy consultant if you prefer this one.
- Turning off the lights and turning down the air conditioning in empty rooms and areas intended for employees only.
- Closing or opening drapes to minimize the necessity for heating or air conditioning.
- Continuously inspecting for and shutting down unused equipment such as exhaust fans in kitchens that were left running.
- Turning off exhaust hoods when no cooking appliance is on.
Saving energy in your beach resort is a hard thing to do. But proper control of lighting, optimized water and room temperatures, and educating your staff on energy awareness can help you do this.
Furthermore, measures for energy efficiency in your resort do not only prove to be beneficial economically but can also increase your resort’s reputation. Thus, attracting more guests and more income. We hope that these small tips we have compiled for you can help you save energy in your beach resort.