100 Missions Walkthrough: Level 2 Solution (Mission 2)

A new mission has been released for the popular 100 Missions game on Android, the Level 2 of the game or Mission 2 of the game where we have to infiltrate the enemy base and destroy it at any cost. This is, as you probably expect, a really difficult challenge and I am here to share with you a walkthrough, a step by step solution on how to complete the 100 Missions Level 2. Walkthrough is text so you can easily follow what is happening.

So let’s not waste any time and’t let’s get things started with this 100 Missions Level 2 Walkthrough!

1. Tap twice to enter the hangar, then go right.
2. Tap the end of the supply truck and pick up the dirty rag from the boxes.
3. Go left and tap the back of the truck and pick up one fuel can.
4. Go to the helicopter, click it and take a chloroform jar. In your inventory, drag the jar over the rag.
5. Tap the rag and use it on the soldier. Tap the right side of the soldier to get a key. Tap his neck area to get dogtags.
6. Go left twice and read the codes. According to the dogtags, our soldier was 1stLt (24) in the Navi (2)
7. Go right and tap the missile heads. Go right and tap the piece of paper on the boxes. According to the paper, the soldier’s id is 997 with AB positive blood type.
8. Get the AK rifle, then go right. To the left of the tank, there is a box. Tap it and take the c4 explosives.
9. Go to the Chems door. According to the code on the door and all the info we got, the code is: 99722472
10. Enter the door and tap the middle locker. Use the key to open and pick up cigarettes, lighter and car keys.
11. Go back and pick up the timer from the rack. Use the C4 explosives with it to make a bomb.
12. Go left and equip the AK rifle. Click the documents to take them from the man. There are a lot og chemical formulas there (you can slide down to see more of the document).
13. Go all the way back to the car and use the car keys to open the door. Pick up the pliers. Click the front of the car and use the pliers on battery to get the wires.
14. Go back to the chemicals room: get the canister from the inventory and drag it near the chemicals. Then put in the chemicals in the correct order: Pa, Sn, Cu, W, Pu
15. Go to the area with the barrels with explosives and drag the explosives over the jerrycan. Then drag over the wires.
16. Place the jerrycan near the barrels and go back until you are out of the hangar!

And this is the 100 Missions walkthrough for level 2 or 100 Missions Mission 2 walkthrough. It was really difficult to find the solution, especially the chemicals order, but we finally managed and we have now completed level 2 of 100 Missions. Stay tuned for more guides which will be available as soon as they are released, and until then you can check out the 100 Missions level 1 walkthrough.